JL AUDIO MX500/4: 4 Ch. Class D Full-Range Amplifier, 500 W

JL AUDIO MX500/4: 4 Ch. Class D Full-Range Amplifier, 500 W

 

MX

Whether you’re hitting the open road or tackling the back trails, MX amplifiers are designed to deliver high-performance audio from the smallest of spaces.

Product Line Overview

Engineered specifically for powersports applications, MX amplifiers utilize JL Audio’s advanced NexD™ switching technologies to generate lots of clean power, while still being kind to small charging systems.

Housed in compact, cast-aluminum chassis, MX amps are water-resistant (IPX6 rated), making them suitable for installations where water, mud or debris cannot be completely avoided. Crossover filters and signal processing features are standard, allowing for easy set-up and system flexibility. Monoblock models include subwoofer level control capability using the optional M-RBC-1 (sold separately).



 

MX500/4

4-Channel Class D Full-Range Amplifier, 125 W x 4 @ 2 Ω / 70 W x 4 @ 4 Ω - 14.4V


Engineered specifically for powersports applications, the 4-channel MX500/4 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum chassis is highly resistant to corrosion, with an IPX6 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.

Generating a solid 70W x 4 into 4 ohms (14.4V, 1% THD), the MX500/4 is fully bridgeable, so it can be used as a 3-channel amplifier, or as a 2-channel amplifier producing a potent 250W x 2 into 4 ohms.

Other features include independent front and rear crossovers with selectable full-range, high-pass or low-pass filter controls and a dual-range input section that accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.

This amplifier features a black powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.

Rated Continuous (RMS) Power @ 14.4 V

@ 4 Ω 70 W RMS x 4
@ 2 Ω 125 W RMS x 4
Bridged @ 4Ω 250 W RMS x 2

Rated Continuous (RMS) Power @ 12.5 V

@ 4 Ω 55 W RMS x 4
@ 2 Ω 90 W RMS x 4
Bridged @ 4Ω 180 W RMS x 2

General Specifications

Frequency Response 20 Hz - 20 kHz (+0, -1dB)
S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W >70.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω >92 / 50 Hz
Damping Factor @ 2 Ω >43 / 50 Hz
THD+N @ Rated Power <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High)
Min.Copper Power / Ground Wire Gauge 4 AWG wire
Fuse Rating 50 A (AFS, AGU or MaxiFuse™)

Signal Processing

Filter Mode(s) Low-Pass or High-Pass
Filter Slope(s) 12 dB/octave
Filter Frequency Range 35 Hz - 300 Hz
Detented, Calibrated Filter Freq. Potentiometers Yes
Filter Defeat Function Yes
Remote Level Control No
Remote Level Modes N/A
Channel Input Mode Switch Yes (2/3/4 ch.)
Pass-Through Preamp Output None
Source Channel Selection for PreOuts N/A

Physical Specifications

Table_Image
Height (H) 1.77 in / 45 mm
Width (W) 9.33 in / 237 mm
Depth (D) 4.50 in / 115 mm

 

 

JL AUDIO MX500/4: 4 Ch. Class D Full-Range Amplifier, 500 W
Click To Enlarge
  • Item #: JLAUDIOMX5004 AMP
  * Marked fields are required.
Qty*
Your Price $359.00
Availability In-Stock

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review